Timber sliding sash window kit. Pin on system adhesive brush pile p strip.

Do not pay £800-£1100 to get a sash window upgraded, use similar brush and do the project DIY.
You may have bits left for the next sash, like a mfi kit , better to have more bits to do the job/idea of general DIY is required !
Total kit of 25 metres of seals.
To suite a timber sliding sash window.
Up to 2100 mm high x 1050 mm wide.
Or smaller we use this as an example for sealing of Victorian or old timber vertical sliding sash windows.
Your staff beads may need refitting, other sizes of draught proofing kit can be made and are available , just ask for your choice of kit.
(For bigger windows, or if you need help please ring 0161-622 0020).
Note top quality plain pile (no fin) with quality adhesive, all the hairy worm brand
You will receive:
To pin on:
8 x 1.05 metre pack, of 6 mm aeroguard a white PVCU carrier l shaped carrying a high performance finned grey, woven brush pile / to fit on top of staff beads , (1 spare length in case one messed up!)
If a high rise window it may be possible to fit 3 pieces on the face of the sash , a small cut with a tenon saw required on the meeting rail each side to allow the shoulder to pass when bottom sash lifted above top sash.
(pinned)1 x 1.05 metres aeroguard buffer, white PVCU/ one piece is fitted on the meeting rail at the top of the lower sash and a piece of aeroguard buffer fitted on the bottom of the top sash so the two marry and close together.
All below adhered:
5 metre pack, of hairy worm at 4.00mm , perimeter pile for fitting to left and right sides of sash windows down sides on the sash boards to hit windows.
5 metre pack of p seal white (or as below).
Additional p seals supplied ideal if windows dropped slightly: 5 metres are supplied as a double seal (may not fit all windows) comes as 2 x 2.50 metres to rip apart so a single part is used , a white p strip self-adhesive (bottom, top, middle compression seals
To fit and or
4 metre pack of hairy worm at 6.00mm, to fit to bottom and top sash, hidden as 3rd seal!
1.50 metre pack of hairy worm at 4.00mm, to fit to middle rail, hidden as 2nd seal!
This may be added to the 5 metre pack of 4 mm when packing!

* leaflet with positions *
Your item will be despatched by myhermes, with a full tracking service
If you require it urgent, carriage by APC is an additional £10.99

Please check sizing carefully
Frame needs brushing down, cleaning with meths or isopropanol or gin
Use of tape and pencil, cuts easily with a hacksaw, pile and p strip with DIY knife or scissors, needs use of clean hammer, clean end with rag, it stops black marks getting on UPVC.
You need to follow the full instructions
Extra help if needed on 0161 622 0020
Culley’s also stock a large range of other style draught excluders, brush strips & weather strip products and also trade rubber extrusions.
Please enquire for help sealing other styles of windows or doors; we solve more than 95% of problems with draught invasion!