Call - 0161 622 0020
Cart 0
TIMBER SLIDING SASH WIMDOW KIT "PIN ON"  SYSTEM & ADHESIVE BRUSH PILE/P STRIP

TIMBER SLIDING SASH WIMDOW KIT "PIN ON" SYSTEM & ADHESIVE BRUSH PILE/P STRIP

£39.95

DO NOT PAY £800-£1100 TO GET A SASH WINDOW UPGRADED , USE SIMILAR BRUSH AND DO THE PROJECT DIY ,

YOU MAY HAVE BITS LEFT FOR THE NEXT SASH , LIKE A MFI KIT , BETTER TO HAVE MORE BITS TO DO THE JOB~IDEA OF GENERAL DIY IS REQUIRED ! 

TOTAL KIT OF 25 METRES OF SEALS 

TO SUITE A TIMBER SLIDING SASH WINDOW

"UP TO 2100 MM HIGH X 1050 MM WIDE"

OR SMALLER WE USE THIS AS AN EXAMPLE FOR SEALING OF VICTORIAN OR OLD TIMBER VERTICAL SLIDING SASH WINDOWS 

your staff beads may need refitting , other sizes OF DRAUGHT PROOFING KIT CAN BE MADE AND ARE available , JUST ASK FOR YOUR CHOICE OF KIT

( BIGGER WINDOWS , OR IF YOU NEED HELP PLEASE RING 0161-622 0020) 

NOTE TOP QUALITY PLAIN PILE (NO FIN )WITH QUALITY ADHESIVE, ALL THE HAIRY WORM BRAND

YOU WILL RECEIVE : 

TO PIN ON :

8 X 1.05 METRE PACK, OF 6 MM AEROGUARD A WHITE PVCu CARRIER L SHAPED CARRYING A HIGH PERFORMANCE FINNED GREY, WOVEN BRUSH PILE / TO FIT ON TOP OF STAFF BEADS , (1 SPARE LENGTH IN CASE ONE MESSED UP!)

IF  A HIGH RISE WINDOW IT MAY BE POSSIBLE TO FIT 3 PIECES ON THE FACE OF THE SASH , A SMALL CUT WITH A TENON SAW REQUIRED ON THE MEETING RAIL EACH SIDE TO ALLOW THE HOULDER TO PASSS WHEN BOTTOM SASH LFITED ABOVE TOP SASH.

(PINNED)1 X 1.05 METRES AEROGUARD BUFFER , WHITE PVCU/ ONE PIECE IS FITTED ON THE MEETING RAIL AT THE TOP OF THE LOWER SASH AND A PIECE OF AEROGUARD BUFFER FITTED ON THE BOTTOM OF THE TOP SASH SO THE TWO MARRY AND CLOSE TOGETHER.

ALL BELOWADHERED :

5 METRE PACK,OF HAIRY WORM @ 4.00MM , PERIMETER PILE FOR FITTING TO LEFT AND RIGHT SIDES OF SASH WINDOWS DOWN SIDES ON THE SASH BOARDS TO HIT WINDOWS

5 METRE PACK OF P SEAL WHITE (OR AS BELOW)

ADDITIONAL P SEALS SUPPLIED IDEAL IF WINDOWS DROPPED SLIGHTLY:- 5 METRES ARE SUPPLIED AS A DOUBLE SEAL (may not fit all windows)   COMES AS 2 X 2.50 METRES TO RIP APART SO A SINGLE PART IS USED , A WHITE P STRIP SELF ADHESIVE (BOTTOM,TOP, MIDDLE COMPRESSION SEALS

TO FIT AND OR 

4 METRE PACK,OF HAIRY WORM @ 6.00MM ,TO FIT TO BOTTOM AND TOP SASH , HIDDEN AS 3RD SEAL !

1.50 METRE PACK,OF HAIRY WORM @ 4.00MM ,TO FIT TO MIDDLE RAIL , HIDDEN AS 2ND  SEAL !

THIS MAY BE ADDED TO THE 5 METRE PACK OF 4 MM WHEN PACKING ! 


*  LEAFLET WITH POSITIONS *

your item will be despatched by HERMES ,with a full tracking service 

IF YOU REQUIRE IT URGENT , CARRIAGE BY APC IS AN ADDITIONAL £10.99


Please check sizing carefully

FRAME NEEDS BRUSHING DOWN, CLEANING WITH METHS OR ISOPROPANOL OR GIN 

USE OF TAPE AND PENCIL,CUTS EASILY WITH A HACKSAW, PILE AND P STRIP WITH DIY KNIFE OR SCISSORS  , NEEDS USE OF CLEAN HAMMER , CLEAN END WITH RAG , IT STOPS BLACK MARKS GETTING ON UPVC

you need to follow the full instructions 

EXTRA HELP IF NEEDED ON 0161 622 0020 

Culley’s also stock a large range of other style draught excluders, brush strips & weather strip products and also trade Rubber extrusions.

Please enquire via e bay questions for help sealing other styles of windows or doors; we solve more than 95% of problems with draught invasion!


Share this Product


More from this collection