Quality Culleys Door draught excluder brush strip seal for up to 890 mm 35" wide

Regular price £11.99 Sale

We supply this part, undrilled to be fitted by numerous methods from screws to rivet to bolt to glues   For 0.890 METRE UP TO 2 FOOT 11...

Unavailable

George Culley / The Hairy Worm

£11.99
The Hairy Worm

We supply this part, undrilled to be fitted by numerous methods from screws to rivet to bolt to glues  


For 0.890 METRE UP TO 2 FOOT 11 "  DOOR THIS IS TO GET IT SENT BY MY HERMES 

to any UK postcode EXCL SCOTTISH ISLES  AND CHANNEL ISLANDS


if it is cold we get busy ........PLEASE ALLOW 2-3 DAYS TO DESPATCH AND 3 TO 4 WORKING DAYS TO DELIVER IE 5-7 WORKING DAYS OR 1-2 WEEKS TO DELIVERY ,coming by tracked budget myhermes  WE HAVE A LOT OF STOCK BUT WE ENGINEER FURTHER TO THE CORRECT SIZE , ALSO OFFERING ANY LENGTHS SUBJECT TO CARRIAGE ! WORTH THE WAIT FOR QUALITY PRODUCT


IF YOU NEED THE BRUSH QUICKER , OR YOU NEED HELP PLEASE ALSO RING 0161 622 0020 11 AM-7 PM M-F 

 

THIS TRIM OF BRUSH SEALS A GAP OF SIZE FROM  0 – 12 MM ,THE TRIM IS 15 MM OUT OF THE STEEL INSIDE THE CARRIER 

 

THIS UK MADE PRODUCT IS USED BY THE DOOR REPAIR AND GLAZING INDUSTRY

 

THIS PRODUCT (SUBJECT TO SIZING (BELOW) WILL FIT DOWN THE BOTTOM OF A DOOR WITH THIS IT WILL SEAL FROM 2 foot to 2  FEET 11" or up to 35 inches wide doors  

   

IF YOU NEED OTHER SIZES PLEASE ASK, OTHER TRIMS ON OUR CULLEY_FAMILY_SHOP


This correctly made brush strip is not an import; this is made in the UK with pride

 

We make a full fill brush with the right components. This is our 4 mm series backing width brush

 

Our brushes are made of nylon 6 an important factor we feel.

For the technically minded , Nylon 6 is a harder wearing material against concrete, than polypropylene, Nylon 6 has a higher working temperature of about 165 degrees centigrade Dry heat. It can go higher.

Polypropylene softens at 70 – 80 degrees centigrade. A Summer temperature your garage door reaches when it gets warm in the summer , bear in mind you could cook eggs on it when hot , polypropylene bristles then bend and stays bent at the end of a hot summer's day ,damaged and cooling bent , causing the brush to appear to move away from its opposing surface,ie a gap....!  I will leave you to decide which is the right choice , I will say a big piece of chalk and a smaller piece of good cheese!  

 

The carrier is made from 


Architectural aluminium a point worth noting, it makes the carrier stronger, its overall height of the flat part of the h holder is 16 mm, the trim of brush is 15 mm out of the steel backing inside the aluminium on this sizing giving about 13 mm of bristle out of the aluminium holder.

 

We supply this part  @  890 mm long so the item can be COURIERED  to any UK postcode EXCL SCOTTISH ISLES  AND CHANNEL ISLANDS

 

(A lot of competitors use polypropylene  and also partial fill! to make brushes lower in cost for them!)


We supply only full fill brushes 

 

The brush strip should only be fitted to the outside of an up and over door , as the rear of the door dips slightly upon lifting , if you put a brush or any seal on the bottom ,it will catch and scrap causing the door to judder on opening , a problem if you have motor driven doors.

Also fitting our brush strip on the outside gives a further important benefit; you are not creating a litter , dirt and insect trap in front of the door to blow in when the door is lifted.

 

This item is suitable for draught proofing , dust  sealing , dust sealing , insect sealing , stops flies , stops moths , cock roaches yes they are in the UK, aluminium,timber ,steel , PVCu, GRP  doors,

 

We have also developed the seal to go up the sides of an up and over door as well look on our shop The Hairy Worm Seal.

 

DO NOT CUT TOGETHER ~ CUT CARRIER & BRUSH CORRECTLY

Premier Strip Brush cuts easily with top hardened cutters, or good pincers and junior hacksaw for the aluminium ,comes with full fitting instructions, you need to follow the full instructions 

 

EVERY DOOR VARIES,WE DO NOT SUPPLY SCREWS AS WE KNOW DIFFERENT SURFACES REQUIRE DIFFERENT FIXINGS AND DIFFERENT COLOURS, AGAIN WE DO NOT DRILL THE PRODUCT AS ALL THE HOLES WILL NOT LINE UP WITH YOUR DOOR.

 

Culley’s also stock a large range of other style draught excluders, brush strips Foam Seals  & weather strip products and also trade rubber extrusions. WE ALSO SELL OFF CUTS AT CERTAIN TIMES.

 

Please enquire:  via e bay with your questions for help sealing other styles of windows or doors; we solve 95% of problems with draught invasion! Our product offers money saving where heating takes place.


DON’T HEAT THE STREET, SAVE IT!!! ITS YOUR MONEY 

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.